ADG3245BRU-REEL7中文资料亚德诺数据手册PDF规格书

GENERAL DESCRIPTION

The ADG3245 is a 2.5 V or 3.3 V, 8-bit, 2-port digital switch.

It is designed on Analog Devices’ low voltage CMOS process,

which provides low power dissipation yet gives high switching

speed and very low on resistance, allowing inputs to be connected

to outputs without additional propagation delay or generating

additional ground bounce noise.

The switches are enabled by means of the bus enable (BE) input

signal. These digital switches allow bidirectional signals to be

switched when ON. In the OFF condition, signal levels up to

the supplies are blocked.

This device is ideal for applications requiring level translation.

When operated from a 3.3 V supply, level translation from 3.3 V

inputs to 2.5 V outputs is allowed. Similarly, if the device is

operated from a 2.5 V supply and 2.5 V inputs are applied, the

device will translate the outputs to 1.8 V. In addition to this, a

level translating select pin (SEL) is included. When SEL is low,

VCC is reduced internally, allowing for level translation between

3.3 V inputs and 1.8 V outputs. This makes the device suited to

applications requiring level translation between different supplies,

such as converter to DSP/microcontroller interfacing.

FEATURES

225 ps Propagation Delay through the Switch

4.5  Switch Connection between Ports

Data Rate 1.244 Gbps

2.5 V/3.3 V Supply Operation

Selectable Level Shifting/Translation

Level Translation

3.3 V to 2.5 V

3.3 V to 1.8 V

2.5 V to 1.8 V

Small Signal Bandwidth 610 MHz

20-Lead TSSOP and LFCSP Packages

APPLICATIONS

3.3 V to 1.8 V Voltage Translation

3.3 V to 2.5 V Voltage Translation

2.5 V to 1.8 V Voltage Translation

Bus Switching

Bus Isolation

Hot Swap

Hot Plug

Analog Switch Applications