Single-Supply, High Speed, Fixed G = 2, Rail-to-Rail Output Video Amplifier

FEATURES Voltage feedback architecture Rail-to-rail output swing: 0.1 V to 4.9 V High speed amplifier −3 dB bandwidth: 225 MHz 0.1 dB flatness at 2 V p-p: 74 MHz Slew rate: 800 V/μs Settling time to 0.1% with 2 V step: 5 ns High input common-mode voltage range −VS − 0.2 V to +VS − 1 V Supply

文件：498.91 Kbytes 页数：20 Pages

AD

亚德诺

Single-Supply, High Speed, Fixed G = 2, Rail-to-Rail Output Video Amplifier

文件：513.84 Kbytes 页数：20 Pages

AD

亚德诺

单电源、高速、固定增益为+2、轨到轨输出视频放大器

ADA4856-3(三路)是一款固定增益为+2、单电源供电、轨到轨输出视频放大器。该放大器具备出色的视频性能，负载为150Ω时，可实现225 MHz的−3 dB带宽、800 V/µs的压摆率以及74 MHz的0.1 dB的平坦度。其输入共模电压范围宽，覆盖地电平以下0.2 V至正电压轨以下1 V的范围。此外，输出电压摆幅控制在任一电源200 mV以内，这使得该款视频放大器可以方便地用在低至3.3 V的单电源电压上。\n\n 在提供高达52mA负载电流的同时，ADA4856-3的每路低功耗电流典型值为7.8mA。对于节能应用而言，该放大器还提供省电功能，可将电源电流降至1mA。\n\ • 电压反馈架构 \n\n• 高速放大器\n-3 dB带宽：225 MHz\n2 V p-p时0.1 dB平坦度：74 MHz \n压摆率：800 V/µs \n稳定时间(稳定度0.1%，步进电压2 V)：5 ns\n\n• 高输入共模电压范围\n-VS − 0.2 V至+VS-1 V\n\n• 轨到轨输出摆幅：0.1 V至4.9 V\n\n• 电源电压范围： 3 V至5.5 V\n\n• 差分增益误差：0.01%\n\n• 差分相位误差：0.01° \n\n• 低功耗\n电源电流典型值：7.8 mA/放大器\n省电功能\n\n• 采用16引脚LFCSP封装;

ADI

亚德诺

Single-Supply, High Speed, Fixed G = 2, Rail-to-Rail Output Video Amplifier

FEATURES Voltage feedback architecture Rail-to-rail output swing: 0.1 V to 4.9 V High speed amplifier −3 dB bandwidth: 225 MHz 0.1 dB flatness at 2 V p-p: 74 MHz Slew rate: 800 V/μs Settling time to 0.1% with 2 V step: 5 ns High input common-mode voltage range −VS − 0.2 V to +VS − 1 V Supply

文件：498.91 Kbytes 页数：20 Pages

AD

亚德诺

Single-Supply, High Speed, Fixed G = 2, Rail-to-Rail Output Video Amplifier

FEATURES Voltage feedback architecture Rail-to-rail output swing: 0.1 V to 4.9 V High speed amplifier −3 dB bandwidth: 225 MHz 0.1 dB flatness at 2 V p-p: 74 MHz Slew rate: 800 V/μs Settling time to 0.1% with 2 V step: 5 ns High input common-mode voltage range −VS − 0.2 V to +VS − 1 V Supply

文件：498.91 Kbytes 页数：20 Pages

AD

亚德诺

Single-Supply, High Speed, Fixed G = 2, Rail-to-Rail Output Video Amplifier

FEATURES Voltage feedback architecture Rail-to-rail output swing: 0.1 V to 4.9 V High speed amplifier −3 dB bandwidth: 225 MHz 0.1 dB flatness at 2 V p-p: 74 MHz Slew rate: 800 V/μs Settling time to 0.1% with 2 V step: 5 ns High input common-mode voltage range −VS − 0.2 V to +VS − 1 V Supply

文件：498.91 Kbytes 页数：20 Pages

AD

亚德诺

Single-Supply, High Speed, Fixed G = 2, Rail-to-Rail Output Video Amplifier

FEATURES Voltage feedback architecture Rail-to-rail output swing: 0.1 V to 4.9 V High speed amplifier −3 dB bandwidth: 225 MHz 0.1 dB flatness at 2 V p-p: 74 MHz Slew rate: 800 V/μs Settling time to 0.1% with 2 V step: 5 ns High input common-mode voltage range −VS − 0.2 V to +VS − 1 V Supply

文件：498.91 Kbytes 页数：20 Pages

AD

亚德诺

Single-Supply, High Speed, Fixed G = 2, Rail-to-Rail Output Video Amplifier

FEATURES Voltage feedback architecture Rail-to-rail output swing: 0.1 V to 4.9 V High speed amplifier −3 dB bandwidth: 225 MHz 0.1 dB flatness at 2 V p-p: 74 MHz Slew rate: 800 V/μs Settling time to 0.1% with 2 V step: 5 ns High input common-mode voltage range −VS − 0.2 V to +VS − 1 V Supply

文件：498.91 Kbytes 页数：20 Pages

AD

亚德诺

Single-Supply, High Speed, Fixed G = 2, Rail-to-Rail Output Video Amplifier

文件：573.33 Kbytes 页数：21 Pages

AD

亚德诺

Single-Supply, High Speed, Fixed G = 2, Rail-to-Rail Output Video Amplifier

文件：573.33 Kbytes 页数：21 Pages

AD

亚德诺