Low Power, Low Noise and Distortion, Rail-to-Rail Output Amplifier

GENERAL DESCRIPTION The ADA4841-1/ADA4841-2 are unity gain stable, low noise and distortion, rail-to-rail output amplifiers that have a quiescent current of 1.5 mA maximum. Despite their low power consumption, these amplifiers offer low wideband voltage noise performance of 2.1 nV/√Hz and 1.4 pA/

文件：588.1 Kbytes 页数：20 Pages

AD

亚德诺

16-Bit Lower Power

GENERAL DESCRIPTION The AD7988-1/AD7988-5 are 16-bit, successive approximation, analog-to-digital converters (ADC) that operate from a single power supply, VDD. The AD7988-1 offers a 100 kSPS throughput, and the AD7988-5 offers a 500 kSPS throughput. They are low power, 16-bit sampling ADCs wit

文件：469.9 Kbytes 页数：24 Pages

AD

亚德诺

Low Power, Low Noise and Distortion ail-to-Rail Output Amplifiers

GENERAL DESCRIPTION The ADA4841-1/ADA4841-2 are unity gain stable, low noise and distortion, rail-to-rail output amplifiers that have a quiescent current of 1.5 mA maximum. Despite their low power consumption, these amplifiers offer low wideband voltage noise performance of 2.1 nV/√Hz and 1.4 pA/

文件：631.26 Kbytes 页数：21 Pages

AD

亚德诺

16-Bit Lower Power PulSAR ADCs in MSOP/LFCSP (QFN)

文件：503.74 Kbytes 页数：24 Pages

AD

亚德诺

Low Power, Low Noise and Distortion Rail-to-Rail Output Amplifiers

文件：667.01 Kbytes 页数：20 Pages

AD

亚德诺

Low Power, 1 nV/?숰z, G ??10 Stable, Rail-to-Rail Output Amplifier

文件：490.01 Kbytes 页数：24 Pages

AD

亚德诺

低功耗、低噪声、低失真、轨到轨输出放大器

ADA4841-1是一款单位增益稳定型、低噪声和低失真、轨到轨输出放大器，最大静态电流为1.5 mA。尽管功耗较低，该放大器却能提供2.1 nV/√Hz的低宽带电压噪声性能和1.4 pA/√Hz的电流噪声性能，以及-105 dBc (100 kHz)的出色无杂散动态范围(SFDR)。为了在较低频率时保持低噪声环境，该放大器在10 Hz时的1/f噪声低至7 nV/√Hz和13 pA/√Hz。\n\n ADA4841-1的输出摆幅可以达到任一供电轨的50 mV以下。输入共模电压范围可以低至负电源电压。该器件可以驱动最高10 pF的容性负载，峰化极小。\n\n ADA4841-1 • 低功耗: 1.1 mA/每个放大器\n\n• 低宽带噪声\n2.1 nV/√Hz\n1.4 pA/√Hz\n\n• 低 1/F 噪声\n7 nV/√Hz （10 Hz）\n13 pA/√Hz （10 Hz）\n\n• 低失真\n-105 dBc （100 kHz, VO = 2 V 峰峰值）\n\n• 高速 \n-3 dB带宽：80 MHz （G = +1)\n12 V/µs 压摆率\n0.1%建立时间：175 ns \n\n• 低失调电压： 0.3 mV （最大值）\n\n• 轨到轨输出\n\n• 关断模式\n\n• 宽电源供电范围: 2.7 V 至 12 V;

ADI

亚德诺

Low Power, Low Noise and Distortion, Rail-to-Rail Output Amplifiers

GENERAL DESCRIPTION The ADA4841-1/ADA4841-2 are unity gain stable, low noise and distortion, rail-to-rail output amplifiers that have a quiescent current of 1.5 mA maximum. Despite their low power consumption, these amplifiers offer low wideband voltage noise performance of 2.1 nV/√Hz and 1.4 pA/

文件：701.44 Kbytes 页数：21 Pages

AD

亚德诺

Low Power, Low Noise and Distortion ail-to-Rail Output Amplifiers

GENERAL DESCRIPTION The ADA4841-1/ADA4841-2 are unity gain stable, low noise and distortion, rail-to-rail output amplifiers that have a quiescent current of 1.5 mA maximum. Despite their low power consumption, these amplifiers offer low wideband voltage noise performance of 2.1 nV/√Hz and 1.4 pA/

文件：631.26 Kbytes 页数：21 Pages

AD

亚德诺

Low Power, Low Noise and Distortion ail-to-Rail Output Amplifiers

GENERAL DESCRIPTION The ADA4841-1/ADA4841-2 are unity gain stable, low noise and distortion, rail-to-rail output amplifiers that have a quiescent current of 1.5 mA maximum. Despite their low power consumption, these amplifiers offer low wideband voltage noise performance of 2.1 nV/√Hz and 1.4 pA/

文件：631.26 Kbytes 页数：21 Pages

AD

亚德诺