AD9288集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

AD9288属于集成电路（IC）的模数转换器（ADC）。由亚德诺半导体技术有限公司制造生产的AD9288模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

GENERAL DESCRIPTION

The AD9288 is a dual 8-bit monolithic sampling analog-to-digital converter with on-chip track-and-hold circuits. It is optimized for low cost, low power, small size, and ease of use. The product operates at a 100 MSPS conversion rate with outstanding dynamic performance over its full operating range. Each channel can be operated independently.

FEATURES

Dual 8-bit, 40 MSPS, 80 MSPS, and 100 MSPS ADC

Low power: 90 mW at 100 MSPS per channel

On-chip reference and track-and-hold

475 MHz analog bandwidth each channel

SNR = 47 dB @ 41 MHz

1 V p-p analog input range each channel

Single 3.0 V supply operation (2.7 V to 3.6 V)

Standby mode for single-channel operation

Twos complement or offset binary output mode

Output data alignment mode

Pin-compatible 10-bit upgrade available

APPLICATIONS

Battery-powered instruments

Hand-held scopemeters

Low cost digital oscilloscopes

I and Q communications