Low Cost Micropower, Low Noise CMOS Rail-to- Rail, Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8613/AD8617/AD8619 are single, dual, and quad micropower, rail-to-rail input and output amplifiers that feature low supply current, low input voltage, and low current noise. The parts are fully specified to operate from 1.8 V to 5.0 V single supply, or ±0.9 V and ±2.5

文件：333.91 Kbytes 页数：16 Pages

AD

亚德诺

Precision Micropower Single-Supply Operational Amplifiers

FEATURES Low Offset Voltage: 100 V Max Low Input Bias Current: 10 nA Max Single-Supply Operation: V to 30 V Dual-Supply Operation:  V to 15 V Low Supply Current: 300 A/Amp Max Unity Gain Stable No Phase Reversal 3.0 1.5 APPLICATIONS Current Sensing (Shunt) Line or Battery-Powered

文件：210.78 Kbytes 页数：16 Pages

AD

亚德诺

Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers

FEATURES Offset voltage: 2.2 mV maximum Low input bias current: 1 pA maximum Single-supply operation: 1.8 V to 5.5 V Low noise: 22 nV/√Hz Micropower: 50 μA/amplifier maximum over temperature No phase reversal Unity gain stable Qualified for automotive applications APPLICATIONS Battery-po

文件：290.47 Kbytes 页数：16 Pages

AD

亚德诺

Low Power, 3.6 MHz, Low Noise, Rail-to-Rail Output, Operational Amplifiers

文件：804.73 Kbytes 页数：19 Pages

AD

亚德诺

Low Power, 3.6 MHz, Low Noise, Rail-to - Rail Output, Operational Amplifiers

文件：706 Kbytes 页数：20 Pages

AD

亚德诺

微功耗、低噪声、低成本CMOS RRIO单通道运算放大器

AD8613 / AD8617 / AD8619分别是单通道/双通道/四通道、微功耗、轨到轨输入和输出放大器，具有低电源电流、低输入电压和低电流噪声特性。这些器件采用1.8 V至5 V单电源或±0.9 V和±2.5 V双电源供电。低噪声、极低输入偏置电流和低功耗特性相结合，使AD8613 / AD8617 / AD8619特别适合便携式和环路供电仪器仪表应用。\n\n 输入与输出上还具有轨到轨摆幅能力，因而设计人员可以在低功耗、单电源系统中缓冲CMOS ADC、DAC、ASIC及其它宽输出摆幅器件。\n\n AD8613提供5引脚SC70和5引脚TSOT-23两种封装。AD • 失调电压：2.2 mV（最大值）\n\n• 低输入偏置电流：1 pA（最大值）\n\n• 单电源供电：1.8 V至5.5 V\n\n• 低噪声：22 nV/√Hz\n\n• 微功耗：每个放大器50 μA（最大值，全温度范围）\n\n• 无相位反转\n\n• 单位增益稳定\n\n• 通过汽车应用认证;

ADI

亚德诺

Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers

FEATURES Offset voltage: 2.2 mV maximum Low input bias current: 1 pA maximum Single-supply operation: 1.8 V to 5.5 V Low noise: 22 nV/√Hz Micropower: 50 μA/amplifier maximum over temperature No phase reversal Unity gain stable Qualified for automotive applications APPLICATIONS Battery-po

文件：290.47 Kbytes 页数：16 Pages

AD

亚德诺

Low Cost Micropower, Low Noise CMOS Rail-to- Rail, Input/Output Operational Amplifiers

GENERAL DESCRIPTION The AD8613/AD8617/AD8619 are single, dual, and quad micropower, rail-to-rail input and output amplifiers that feature low supply current, low input voltage, and low current noise. The parts are fully specified to operate from 1.8 V to 5.0 V single supply, or ±0.9 V and ±2.5

文件：333.91 Kbytes 页数：16 Pages

AD

亚德诺

丝印：A0Y；Package：SC70；Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers

FEATURES Offset voltage: 2.2 mV maximum Low input bias current: 1 pA maximum Single-supply operation: 1.8 V to 5.5 V Low noise: 22 nV/√Hz Micropower: 50 μA/amplifier maximum over temperature No phase reversal Unity gain stable Qualified for automotive applications APPLICATIONS Battery-po

文件：290.47 Kbytes 页数：16 Pages

AD

亚德诺

丝印：A0Y；Package：SC70；Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers

FEATURES Offset voltage: 2.2 mV maximum Low input bias current: 1 pA maximum Single-supply operation: 1.8 V to 5.5 V Low noise: 22 nV/√Hz Micropower: 50 μA/amplifier maximum over temperature No phase reversal Unity gain stable Qualified for automotive applications APPLICATIONS Battery-po

文件：290.47 Kbytes 页数：16 Pages

AD

亚德诺