AD7243BQ集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

AD7243BQ属于集成电路（IC）的数模转换器（DAC）。由亚德诺半导体技术有限公司制造生产的AD7243BQ数模转换器（DAC）数模转换器（DAC、D/A、D2A 或 D 转 A）可将数字信号转换为缓冲或无缓冲的模拟电压或电流。DAC 架构是否适合特定应用，要取决于分辨率和采样频率。DAC 通常用于音乐播放器，将数字数据流转换为模拟音频流。它们还用于电视和手机，将数字视频数据转换为模拟视频信号，再连接到屏幕驱动器，以显示单色或彩色图像。

GENERAL DESCRIPTION

The AD7243 is a complete 12-bit, voltage output, digital-to-analog converter with output amplifier and Zener voltage reference on a monolithic CMOS chip. No external trims are required to achieve full specified performance.

The output amplifier is capable of developing +10 V across a 2 kΩ load. The output voltage ranges with single supply operation are 0 V to +5 V or 0 V to +10 V, while an additional bipolar ±5 V output range is available with dual supplies. The ranges are selected using the internal gain resistor.

The data format is natural binary in both unipolar ranges, while either offset binary or two’s complement format may be selected in the bipolar range. A CLR function is provided which sets the output to 0 V in both unipolar ranges and in the two’s complement bipolar range, while with offset binary data format, the output is set to –REFIN. This function is useful as a power-on reset as it allows the output to be set to a known voltage level.

FEATURES

12-Bit CMOS DAC with

On-Chip Voltage Reference

Output Amplifier

Three Selectable Output Ranges

–5 V to +5 V, 0 V to +5 V, 0 V to +10 V

Serial Interface

300 kHz DAC Update Rate

Small Size: 16-Lead DIP or SOIC

Nonlinearity: ±1/2 LSB TMIN to TMAX

Low Power Dissipation: 100 mW Typical

APPLICATIONS

Process Control

Industrial Automation

Digital Signal Processing Systems

Input/Output Ports