74HCT1G66GV中文资料安世数据手册PDF规格书

1. General description

The 74HC1G66; 74HCT1G66 is a single-pole, single-throw analog switch with two input/output

terminals (nY and nZ) and a digital enable input (nE). When nE is LOW, the analog switch is turned

off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs

to voltages in excess of VCC.

The HCT device features control inputs with reduced input threshold levels to allow interfacing to

TTL logic levels.

2. Features and benefits

• Wide supply voltage range from 2.0 V to 10.0 V

• Very low ON resistance:

• 45 Ω (typ.) at VCC = 4.5 V

• 30 Ω (typ.) at VCC = 6.0 V

• 25 Ω (typ.) at VCC = 9.0 V

• High noise immunity

• CMOS low power dissipation

• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

• Complies with JEDEC standards:

• JESD8C (2.7 V to 3.6 V)

• JESD7A (2.0 V to 6.0)

• ESD protection:

• HBM JESD22-A114E exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V

• Specified from -40 °C to +85 °C and -40 °C to +125 °C