74ACT16240DLR集成电路（IC）的缓冲器驱动器接收器收发器规格书PDF中文资料

74ACT16240DLR属于集成电路（IC）的缓冲器驱动器接收器收发器。由德州仪器制造生产的74ACT16240DLR缓冲器，驱动器，接收器，收发器逻辑缓冲器、驱动器、接收器和收发器允许隔离对某个电路的逻辑信号的访问，以用于另一电路。缓冲器将其输入信号（不变或反相）传递到其输出，并可能用于清除弱信号或驱动负载。在布尔逻辑仿真器中，缓冲器主要用于增加传播延迟。逻辑接收器和收发器允许在数据总线之间进行隔离通信。

Members of the Texas Instruments

WidebusE Family

Inputs Are TTL-Voltage Compatible

3-State Outputs Drive Bus Lines or Buffer

Memory Address Registers

Flow-Through Architecture Optimizes

PCB Layout

Distributed VCC and GND Pin Configuration

Minimizes High-Speed Switching Noise

EPIC E (Enhanced-Performance Implanted

CMOS) 1-mm Process

500-mA Typical Latch-Up Immunity at

125°C

Package Options Include Plastic 300-mil

Shrink Small-Outline (DL) Packages Using

25-mil Center-to-Center Pin Spacings and

380-mil Fine-Pitch Ceramic Flat (WD)

Packages Using 25-mil Center-to-Center

Spacings

description

The SN54ACT16240 and 74ACT16240 are 16-bit

buffers or line drivers designed specifically to

improve both the performance and density of

3-state memory address drivers, clock drivers,

and bus-oriented receivers and transmitters. The

devices can be used as four 4-bit buffers, two 8-bit

buffers, or one 16-bit buffer. These devices

provide inverting outputs and symmetrical

active-low output-enable (OE) inputs.

The 74ACT16240 is packaged in TI’s shrink small-outline package, which provides twice the I/O pin count and

functionality of standard small-outline packages in the same printed-circuit-board area.

The SN54ACT16240 is characterized for operation over the full military temperature range of –55°C to 125°C.

The 74ACT16240 is characterized for operation from –40°C to 85°C.