1201550012_V01中文资料莫仕数据手册PDF规格书

Application

The four indent crimp tool KS-TOOL-01 / 1201550012 has been developed for

optimal crimping of machined contacts with diameters from 0.08 to 2.5 mm2

(28 through 14 AWG).

How to Crimp

The reference table indicates the correct locator position to be selected and the crimp

depth to be adjusted for the contact to be crimped. The contact is then inserted through

the access hole of the tool on the opposite side of the locator. The contact is held in place

by closing the handles to the first lock-in position thus preventing the contact from falling

out of the tool and facilitating insertion of the wire into the contact.

The precision ratchet assures consistently accurate crimping every time by forcing the tool

to be closed all the way completing the crimping cycle before the tool can be opened

again.

Exchange of the Locator

The locator can be exchanged by removing the socket head cap screw with a socket wrench.

It can then be disassembled from the hex head screw by turning it counter-clockwise.