首页>TXV0106BQBR>规格书详情
TXV0106BQBR中文资料PDF规格书
TXV0106BQBR规格书详情
1 Features
• Supports up to 500Mbps for 1.65 V to 3.6 V
• Meets RGMII 2.0 timing specifications:
– < 750 ps rise and fall time
– < ± 5 duty cycle distortion
– < ± 400 ps channel to channel skew
– Up to 250Mbps/channel
• Integrated 10 Ω damping output resistor to
minimize signal reflections
• High drive strength (up to 12 mA at 3.6 V)
• Fully configurable symmetric dual-rail design
• Optimal signal integrity performance with 390ps
peak-to-peak jitter for 1.8 V to 3.3 V
• Features VCC isolation and VCC disconnect
• Ioff supports partial-power-down mode operation
• Latch-up performance exceeds 100 mA per JESD
78, Class II
• ESD protection exceeds JESD 22:
– 2000-V Human-Body Model
– 1000-V Charged-Device Model
• Low power consumption:
– 10-μA maximum (25°C)
– 20-μA maximum (–40°C to 125°C)
• Operating temperature from –40°C to +125°C
2 Applications
• Medium or short range radar
• ADAS domain controller
• HVAC controller design
• Machine vision camera
• Rack sever motherboard
• IP telephone
3 Description
The TXV0106 is a 6-bit, dual-supply fixed-direction
low-skew, low jitter voltage translation device. This
device can be used for redriving, voltage translation
and power isolation when implementing skew
sensitive interface, such as RGMII between Ethernet
MAC and PHY. The Ax I/O pins and enable pin
(OE) are referenced to VCCA logic levels, and Bx
I/O pins are referenced to VCCB logic levels. This
device has improved channel-to-channel skew, duty
cycle distortion and symmetric rise or fall timing for
applications requiring strict timing conditions.
This device is fully specified for partial-power-down
applications using Ioff. The Ioff circuitry disables the
outputs, thus preventing damaging current backflow
through the device when it is powered down.
The VCC isolation feature is designed so that if either
VCC supply is at or near 0 V both ports will switch to
a high-impedance state. This feature enables power
isolation for communications across multiple MACs
and PHYs, and is beneficial in situations where MACs
and PHYs are powered up asynchronously preventing
current backflow between devices.
The TXV0106 transmits data in a fixed direction from
the A bus to the B bus. When OE is set to High, both
Ax and Bx pins will be forced into a high-impedance
state. See Device Functional Modes for a summary of
the operation of the control logic.
供应商 | 型号 | 品牌 | 批号 | 封装 | 库存 | 备注 | 价格 |
---|---|---|---|---|---|---|---|
SILICONIX |
589220 |
16余年资质 绝对原盒原盘 更多数量 |
询价 | ||||
SILIUCON |
22+ |
SOP14 |
38598 |
郑重承诺只做原装进口货 |
询价 | ||
SI |
5000 |
询价 | |||||
SILICONIX |
23+ |
SSOP-8 |
5000 |
原装正品,假一罚十 |
询价 | ||
SILICONIX |
2023+ |
SOP8 |
700000 |
柒号芯城跟原厂的距离只有0.07公分 |
询价 | ||
RUBYCON/红宝石 |
18+19+ |
NA |
880000 |
明嘉莱只做原装正品现货 |
询价 | ||
雅创零件 |
2112+ |
- |
31500 |
1个/袋一级代理专营品牌!原装正品,优势现货,长期排 |
询价 | ||
SILICONIX |
24+ |
SOP8 |
10409 |
询价 | |||
SILIUCON |
23+ |
SOP14 |
50000 |
全新原装正品现货,支持订货 |
询价 | ||
雅创零件 |
23+ |
6000 |
诚信服务,绝对原装原盘 |
询价 |