Applications

• Factory Automation (FA)

• Programmable Logic Controllers (PLCs)

• High-Speed Digital Interfacing for Instrumentation and Control Devices

General

The TLP2766A consists of a high-output GaAℓAs light-emitting diode coupled with a high-gain, high-speed photo

detector. It is housed in the SO6L package.

This product can be mounted on the same land-pattern with Toshiba's SDIP6 packages.

In addition, the SO6L packages has a maximum height of 2.3 mm, which is approximately 45 thinner than the

conventional SDIP6 packages. Its low profile package contributes to system size reduction and can be placed in

height-restricted locations, such as the back of a board.

Also, since TLP2766A guarantees high Isolation Voltage of 5 kVrms (min), this product satisfies the reinforced

insulation class according to international safety standards.

The detector has a totem-pole output stage with current sourcing and sinking capabilities.

The TLP2766A has an internal Faraday shield that provides a guaranteed common-mode transient immunity of

±20 kV/μs.

Features

(1) Inverter logic type (Totem pole output)

(2) Package: SO6L

(3) Operating temperature: -40 to 125 

(4) Supply voltage: 2.7 to 5.5 V

(5) Data transfer rate: 20 MBd (typ.) (NRZ)

(6) Threshold input current: 3.5 mA (max)

(7) Supply current: 3 mA (max)

(8) Propagation delay time: 55 ns (max)

(9) Pulse width distortion: 30 ns (max)

(10) Common-mode transient immunity: ±20 kV/μs (min)

(11) Isolation voltage: 5000 Vrms (min)

(12) Safety standards