General description

The SA605 is a high performance monolithic low-power FM IF system incorporating a mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector, muting, logarithmic received signal strength indicator (RSSI), and voltage regulator. The SA605 combines the functions of NXP SA602A and SA604A, but features a higher mixer input intercept point, higher IF bandwidth (25 MHz) and temperature compensated RSSI and limiters permitting higher performance application. The SA605 is available in 20-lead SO (surface-mounted miniature package) and 20-lead SSOP (shrink small outline package).

Features and benefits

■ Low power consumption: 5.7 mA typical at 6 V

■ Mixer input to >500 MHz

■ Mixer conversion power gain of 13 dB at 45 MHz

■ Mixer noise figure of 4.6 dB at 45 MHz

■ XTAL oscillator effective to 150 MHz (L/C oscillator to 1 GHz local oscillator can be injected)

■ 102 dB of IF amplifier/limiter gain

■ 25 MHz limiter small signal bandwidth

■ Temperature-compensated logarithmic Received Signal Strength Indicator (RSSI) with a dynamic range in excess of 90 dB

■ Two audio outputs — muted and unmuted

■ Low external component count; suitable for crystal/ceramic/LC filters

■ Excellent sensitivity: 0.22 V into 50  matching network for 12 dB SINAD (Signal-to-Noise-and-Distortion ratio) for 1 kHz tone with RF at 45 MHz and IF at 455 kHz

■ SA605 meets cellular radio specifications

■ ESD hardened

Applications

■ Cellular radio FM IF

■ High performance communications receivers

■ Single conversion VHF/UHF receivers

■ SCA receivers

■ RF level meter

■ Spectrum analyzer

■ Instrumentation

■ FSK and ASK data receivers

■ Log amps

■ Wideband low current amplification

SA605D属于RF/IF，射频/中频和 RFID > 射频接收器。恩智浦半导体公司制造生产的SA605D射频接收器RF 接收器用于接收已调制的射频信号并对其进行解调，然后将数据传送到系统中进行处理。频率范围是 AM、FM、WB、0 Hz 至 64 GHz，数据速率为 250 bps 至 16 Gbps，数据接口包括连接器、I2C、I2S、引脚焊盘、并行、PCB、串行、焊盘、SPI、UART 和 USB。