Features

• High Efficiency – The PT-100 provides typical 99 conversion

efficiency and uses less than four watts of power in

nighttime mode.

• MPPT – Maximum Power Point Tracking technology for

increased PV power output efficiency.

• Voltage Options – Compatible with 12, 24, or 48V battery

systems with automatic detection of system voltage. The PT-100

will produce up to 100 amps regardless of battery voltage.

• Supports a Large PV Array – A single controller supports a large

PV array up to 6600W. Larger PV arrays may be used because the

PT-100 is current limited to 100 amps for maximum harvest.

• Optimal Battery Charging – Automatic battery temperature

compensation using an included external temperature sensor

for optimum battery charging, even during extreme

temperature changes.

• Multi-stage Charging – Maximizes system performance and

improves battery life.

• GFDI: Integrated PV Ground-Fault Detection and Interruption/

Indication, with pre-fault leakage/diagnostic metering.

• LED Indicators and Screen – Multiple LED indicators and

large digital LED screen on front panel for easy-to-read

system information.

• On-site Updates – The PT-100’s software can be updated on site.

• Extensive Electronic Protection – Over-temperature protection,

power derating when temperature is high, PV short circuit and

high PV input shutdown, output overcurrent protection and

night-time back-feed (reverse current) protection.

• AFCI – An integrated PV Arc-Fault Circuit Interrupter detects,

indicates, and extinguishes series arcs.

• Convenient Installation – Run all of the wiring to the unique,

remain-in-place wiring box with ease prior to installing the full

PT-100 unit.

• Easy MP and MMP integration – The PT-100 is designed to work

with a Magnum Panel (MP) or Mini-Magnum Panel (MMP). It

provides room and access to PV and battery disconnect breakers.