LButtonDEVICE OVERVIEW

The PIC16LF1902/3 are described within this data sheet. They are available in 28-pin packages. Figure 1-1 shows a block diagram of the PIC16LF1902/3 devices. Table 1-2 shows the pinout descriptions.

Reference Table 1-1 for peripherals available per device.

High-Performance RISC CPU:

• C Compiler Optimized Architecture

• Only 49 Instructions

• Up to 7 Kbytes Self-Write/Read Flash Program Memory Addressing

• Up to 256 Bytes Data Memory Addressing

• Operating Speed:

- DC – 20 MHz clock input @ 3.6V

- DC – 16 MHz clock input @ 1.8V

- DC – 200 ns instruction cycle

• Interrupt Capability with Automatic Context Saving

• 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset

• Direct, Indirect and Relative Addressing modes:

- Two full 16-bit File Select Registers (FSRs)

- FSRs can read program and data memory

Flexible Oscillator Structure:

• 16 MHz Internal Oscillator:

- Accurate to ±10, typical

- Software selectable frequency range from 16 MHz to 31.25 kHz

• 31 kHz Low-Power Internal Oscillator

• Three External Clock modes up to 20 MHz

• Two-Speed Oscillator Start-up

Special Microcontroller Features:

• Operating Voltage Range:

- 1.8V-3.6V

• Self-Programmable under Software Control

• Power-on Reset (POR)

• Power-up Timer (PWRT)

• Ultra Low-Power Brown-Out Reset (ULPBOR)

• Extended Watchdog Timer (WDT)

• In-Circuit Serial Programming™ (ICSP™) via Two Pins

• In-Circuit Debug (ICD) via Two Pins

• Enhanced Low-Voltage Programming (LVP)

• Programmable Code Protection

• Power-Saving Sleep mode

PIC16LF1902/3 Low-Power Features:

• Standby Current:

- 60 nA @ 1.8V, typical

• Operating Current:

- 7.0 μA @ 32 kHz,1.8V, typical

- 150 μA @ 1 MHz, 1.8V, typical

• Timer1 Oscillator Current:

- 600 nA @ 32 kHz, 1.8V, typical

• Low-Power Watchdog Timer Current:

- 500 nA @ 1.8V, typical

Analog Features:

• Analog-to-Digital Converter (ADC):

- 10-bit resolution, up to 11 channels

- Conversion available during Sleep

- Dedicated ADC RC oscillator

- Fixed Voltage Reference (FVR) as channel

• Integrated Temperature Indicator

• Voltage Reference module:

- Fixed Voltage Reference (FVR) with 1.024V and 2.048V output levels

Peripheral Highlights:

• Up to 25 I/O Pins and 1 Input-only Pin:

- High current 25 mA sink/source

- Individually programmable weak pull-ups

- Individually programmable interrupt-on change (IOC) pins

• Integrated LCD Controller:

- 19 segment pins and 72 total segments

- Variable clock input

- Contrast control

- Internal voltage reference selections

• Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler

• Enhanced Timer1:

- 16-bit timer/counter with prescaler

- External Gate Input mode

- Dedicated low-power 32 kHz oscillator driver

PIC16LF1902属于集成电路（IC） > 微控制器。微芯科技股份有限公司制造生产的PIC16LF1902微控制器微控制器产品是相对复杂的用户可编程数字逻辑器件。这些产品与视为微控制器的器件密切相关，两者之间的区别主要体现在制造商选择的用词。不过按照传统，微控制器集成了工作存储器，也更可能包含混合信号外设，并且往往与更简单的软件范例结合使用，旨在重复执行一系列预定义的任务。