首页>PCA9541>规格书详情

PCA9541中文资料PDF规格书

PCA9541
厂商型号

PCA9541

参数属性

PCA9541 封装/外壳为16-VQFN 裸露焊盘;包装为托盘;类别为集成电路(IC) > 专用;PCA9541应用范围:2 通道 I²C 多路复用器;产品描述:IC INTFACE SPECIALIZED 16HVQFN

功能描述

2-to-1 I2C master selector with interrupt logic and reset

文件大小

279.86 Kbytes

页面数量

30

生产厂商 ROYAL PHILIPS
企业简称

Philips飞利浦

中文名称

荷兰皇家飞利浦官网

原厂标识
数据手册

下载地址一下载地址二

更新时间

2024-5-23 20:00:00

PCA9541规格书详情

DESCRIPTION

The PCA9541 is a 2-to-1 I2C master selector designed for high reliability dual master I2C applications where system operation is required, even when one master fails or the controller card is removed for maintenance. The two masters (e.g., primary and back-up) are located on separate I2C-buses that connect to the same downstream I2C-bus slave devices. I2C commands are sent

by either I2C-bus master and are used to select one master at a time. Either master at any time can gain control of the slave devices if the other master is disabled or removed from the system. The failed master is isolated from the system and will not affect communication between the on-line master and the slave devices on the downstream I2C-bus.

FEATURES

• 2-to-1 bi-directional master selector

• I2C interface logic; compatible with SMBus standards

• PCA9541/01 powers-up with Channel 0 selected

• PCA9541/02 powers-up with Channel 0 selected after STOP condition detected (bus idle) on Channel 0

• PCA9541/03 powers-up with no channel selected and either master can take control of the bus

• Active LOW Interrupt Input

• 2 Active LOW Interrupt Outputs

• Active LOW Reset Input

• 4 address pins allowing up to 16 devices on the I2C-bus

• Channel selection via I2C-bus

• Bus initialization/recovery function

• Bus traffic sensor

• Low RdsON switches

• Allows voltage level translation between 1.8 V, 2.5 V, 3.3 V and 5 V buses

• No glitch on power-up

• Supports hot insertion

• Software identical for both masters

• Low stand-by current

• Operating power supply voltage range of 2.3 V to 5.5 V

• 6.0 V tolerant Inputs

• 0 to 400 kHz clock frequency

• ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115 and 1000 V CDM per JESD22-C101

• Latch-up testing is done to JESDEC Standard JESD78 which exceeds 100 mA

• Packages offered: SO16, TSSOP16, HVQFN16

APPLICATIONS

• High reliability systems with dual masters

• Gatekeeper multiplexer on long single bus

• Bus initialization/recovery for slave devices without hardware reset

• Allows masters without arbitration logic to share resources

产品属性

  • 产品编号:

    PCA9541ABS/03,118

  • 制造商:

    NXP USA Inc.

  • 类别:

    集成电路(IC) > 专用

  • 包装:

    托盘

  • 应用:

    2 通道 I²C 多路复用器

  • 接口:

    I²C,SMBus

  • 电压 - 供电:

    2.3V ~ 5.5V

  • 封装/外壳:

    16-VQFN 裸露焊盘

  • 供应商器件封装:

    16-HVQFN(4x4)

  • 安装类型:

    表面贴装型

  • 描述:

    IC INTFACE SPECIALIZED 16HVQFN

供应商 型号 品牌 批号 封装 库存 备注 价格
NXP/恩智浦
22+
SOIC-16
100000
代理渠道/只做原装/可含税
询价
NXP/恩智浦
24+
SSOP
58000
全新原厂原装正品现货,可提供技术支持、样品免费!
询价
NXP
23+
TSSOP
20000
原厂原装正品现货
询价
NXP
2023+
TSSOP16
8800
正品渠道现货 终端可提供BOM表配单。
询价
NXP
1836+
QFN
9852
只做原装正品现货!或订货假一赔十!
询价
NXP/恩智浦
23+
TSSOP16
20000
原装正品 欢迎咨询
询价
NXP/恩智浦
21+
SOP
13880
公司只售原装,支持实单
询价
NXP(恩智浦)
23+
7350
现货供应,当天可交货!免费送样,原厂技术支持!!!
询价
NXP(恩智浦)
23+
NA/
8735
原厂直销,现货供应,账期支持!
询价
NXP(恩智浦)
23+
TSSOP16
6000
询价