Introduction

Field Programmable System-on-a-Chip (FPSCs) bring a whole new dimension to programmable logic: Field Programmable Gate Array (FPGA) logic and an embedded system solution on a single device. Lattice has developed a solution for designers who need the many advantages of FPGA-based design implementation, coupled with highspeed serial backplane data transfer.

Features

Embedded Core Features

• Implemented in an ORCA Series 4 FPGA.

• Allows a wide range of high-speed backplane applications, including SONET transport and termination.

• No knowledge of SONET/SDH needed in generic applications. Simply supply data, 78 MHz—106 MHz clock, and a frame pulse.

• High-Speed Interface (HSI) function for clock/data recovery serial backplane data transfer without external clocks.

• Eight-channel HSI function provides 850 Mbits/s serial interface per channel for a total chip bandwidth of 6.8 Gbits/s (full duplex).

• HSI function uses Lattice’s 850 Mbits/s serial interface core. Rates from 126 Mbits/s to 850 Mbits/s are supported.

• LVDS I/Os compliant with EIA®-644 support hot insertion. All embedded LVDS I/Os include both input and output on-board termination to allow long-haul driving of backplanes.

• Low-power 1.5 V HSI core.

• Low-power LVDS buffers.

• Programmable STS-3, and STS-12 framing.

• Independent STS-3, and STS-12 data streams per quad channels.

• 8:1 data multiplexing/demultiplexing for 106.25 MHz byte-wide data processing in FPGA logic.

• On-chip, Phase-Lock Loop (PLL) clock meets (type B) jitter tolerance specification of ITU-T recommendation G.958.

• Powerdown option of HSI receiver on a per-channel basis.

• HSI automatically recovers from loss-of-clock once its reference clock returns to normal operating state.

• Frame alignment across multiple ORT8850 devices for work/protect switching at OC-192/STM-64 and above rates.

• In-band management and configuration through transport overhead extraction/insertion.

• Supports transparent modes where either the only insertion is A1/A2 framing bytes, or no bytes are inserted.

• Streamlined pointer processor (pointer mover) for 8 kHz frame alignment to system clocks.

• Built-in boundry scan (IEEE ®1149.1 JTAG).

• FIFOs align incoming data across all eight channels (two groups of four channels or four groups of two channels) for both SONET scrambling. Optional ability to bypass alignment FIFOs.

• 1 + 1 protection supports STS-12/STS-48 redundancy by either software or hardware control for protection switching applications. STS-192 and above rates are supported through multiple devices.

• ORCA FPGA soft intellectual property core support for a variety of applications.

• Programmable Synchronous Transport Module (STM) pointer mover bypass mode.

• Programmable STM framer bypass mode.

• Programmable Clock and Data Recovery (CDR) bypass mode (clocked LVDS High-Speed Interface).

• Redundant outputs and multiplexed redundant inputs for CDR I/Os allow for implementation of eight channels with redundancy on a single device.

ORT8850L-1BM680C属于集成电路（IC） > FPGA（现场可编程门阵列）。莱迪思半导体制造生产的ORT8850L-1BM680CFPGA（现场可编程门阵列）FPGA 是用于执行逻辑运算和信息处理的用户可配置集成电路产品，通常具有非常高级别的集成功能。这些器件通常用于代替通用微处理器，其中已知运算将以极高的速度执行，例如用于接收和处理来自高速数据转换器的信息。它们通常需要外部存储设备来存储用户所需的配置，并在启动时重新加载这些配置。