General description

The NTS0101 is a 1-bit, dual supply translating transceiver with auto direction sensing,

that enables bidirectional voltage level translation. It features two 1-bit input-output ports

(A and B), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A)

can be supplied at any voltage between 1.65 V and 3.6 V. VCC(B) can be supplied at any

voltage between 2.3 V and 5.5 V. This flexibility makes the device suitable for translating

between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins A and OE are

referenced to VCC(A) and pin B is referenced to VCC(B). A LOW level at pin OE causes the

outputs to assume a high-impedance OFF-state. This device is fully specified for partial

power-down applications using IOFF. The IOFF circuitry disables the output, preventing the

damaging backflow current through the device when it is powered down.

Features and benefits

 Wide supply voltage range:

 VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V

 Maximum data rates:

 Push-pull: 50 Mbps

 IOFF circuitry provides partial Power-down mode operation

 Inputs accept voltages up to 5.5 V

 ESD protection:

 HBM JESD22-A114E Class 2 exceeds 2500 V for A port

 HBM JESD22-A114E Class 3B exceeds 8000 V for B port

 MM JESD22-A115-A exceeds 200 V

 CDM JESD22-C101E exceeds 1500 V

 Latch-up performance exceeds 100 mA per JESD 78B Class II

 Multiple package options

 Specified from 40 C to +85 C and 40 C to +125 C

Applications

 I2C/SMBus

 UART

 GPIO

NTS0101GF属于集成电路（IC） > 转换器，电平移位器。恩智浦半导体公司制造生产的NTS0101GF转换器，电平移位器逻辑转换器或电平移位器 IC 可用于在数字逻辑设备之间传递信息，这些设备可在不同/不兼容的供电电压下工作，或可实现不同的信令方式。例如，可以将需要 5 V 电源的数字输出传感器连接到具有 3.3 V I/O 电源的 FPGA，或者在 CMOS 或 TTL 等单端信令方式与 PECL 或 LVDS 等差分技术之间进行转换。