NTE1915中文资料PDF规格书
NTE1915规格书详情
Description:
The NTE1915 is a 3 terminal negative regulator in a TO3 type package with a fixed output voltage of –12V and up to 1.5A load current capability. Where other voltages are required, the NTE1911 provides an output voltage range of –1.2V to –37V.
This device needs only one external component – a compensation capacitor at the output, making it easy to apply. Worst case guarantees on output voltage deviation due to any combination of line, load, or temperature variation assure satisfactory system operation.
Exceptional effort has been made to make the NTE1915 immune to onerload conditions. This regulator has current limiting which is independent of temperature, combined with thermal overload protection. Internal current limiting protects against momentary faults while thermal shutdown prevents junction temperatures from exceeding safe limits during prolonged overloads.
Although primarily intended for fixed output voltage applications, the NTE1915 may be programmed for higher output voltages with a single resistive divider. The low quiescent drain current of the device allows this technique to be used woth good regulation.
Features:
• Preset Output Voltage Error Less Than ±3
• Preset Current Limit
• Internal Thermal Shutdown
• Operates with Input–Output Voltage Differential Down to 1V
• Excellent Ripple Rejection
• Low Temperature Drift
• Easily Adjustable to Higher Output Voltage
产品属性
- 型号:
NTE1915
- 制造商:
NTE Electronics
- 功能描述:
VOLTAGE REGULATOR NEGATIVE -12V IO=1.5A TO-3 CASE
- 功能描述:
IC NEGATIVE FIXED REG -12V
- 功能描述:
IC, NEGATIVE FIXED REG, -12V, TO3
- 功能描述:
IC, NEGATIVE FIXED REG, -12V, TO3; Primary Input
- Voltage:
-32V; Output Voltage
- Min:
-1.2V; Output Voltage
- Max:
-37V; Output Voltage
- Fixed:
-12V; No. of
- Pins:
3; No. of
- Outputs:
1; Output
- Current:
1.5A; Operating Temperature
- Min:
0C
- 功能描述:
Standard Regulator Neg -12V 1.5A 3-Pin(2+Tab) TO-3