Dual Differential (EIA-422-A)/Quad Single-Ended (EIA-423-A) Line Drivers

The MC26LS30 is a low power Schottky set of line drivers which can be configured as two differential drivers which comply with EIA−422−A standards, or as four single−ended drivers which comply with EIA−423−A standards. A mode select pin and appropriate choice of power supplies determine the mode. Each driver can source and sink currents in excess of 50 mA.

The MC26LS30 is available in a 16−pin surface mount package. Operating temperature range is −40°C to +85°C.

• Operates as Two Differential EIA−422−A Drivers, or Four

Single−Ended EIA−423−A Drivers

• High Impedance Outputs in Differential Mode

• Short Circuit Current Limit In Both Source and Sink Modes

• ±10 V Common Mode Range on High Impedance Outputs

• ±15 V Range on Inputs

• Low Current PNP Inputs Compatible with TTL, CMOS, and MOS Outputs

• Individual Output Slew Rate Control in Single−Ended Mode

• Replacement for the AMD AM26LS30 and National Semiconductor DS3691

• Pb−Free Packages are Available

MC26LS30DR2属于集成电路（IC） > 驱动器，接收器，收发器。安森美半导体公司制造生产的MC26LS30DR2驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。