DESCRIPTION

The LTM®4660 is a complete 300W output switching

mode hybrid-topology step-down DC/DC μModule®

micromodule) nonisolated bus converter. Its exposed

power inductor resides on the top of the package, providing

an intrinsic path for heat to dissipate up and out

of the module—away from one’s printed circuit board.

Included in the package are the switching controller IC,

power MOSFETs and supporting components. Only flying

charge-pump) capacitors, bulk input and output bypass

capacitors, and a few configuration passives are needed.

The LTM4660 features frequency synchronization,

Burst Mode® operation and output voltage soft-start and

tracking. An onboard temperature diode is available for

temperature monitoring. The LTM4660 protects against

short-circuit, overcurrent, and overtemperature faults. For

higher power applications, multiple LTM4660 modules

can be easily paralleled.

The LTM4660 is offered in a 16mm × 16mm × 10.34mm

BGA package with RoHS compliant terminal finish.

FEATURES

- Input Voltage Range: 30V to 60V (65V Abs. Max.)

- Wide Output Voltage: 4.5V to 18V (VOUT < VIN/2)

- 97.3 Peak Efficiency (12VOUT at 15A, 48VIN)

- ±1.5 Maximum Total DC Output Error

- Up to 300W Output Power

- Scalable: Parallel LTM4660s for Higher Power

- Fixed Frequency Current Mode Control

- Phase-Lockable External Synchronization from 200kHz to 1MHz

- Low Start-Up Inrush Current with Flying Capacitor

Voltage-Balancing Prior to DC/DC Switching Action

- Output Voltage Tracking with Soft-Start

- Short-Circuit Protection with Adjustable Retry-Timer

- Overcurrent and Overtemperature Protection

- Onboard Diode Temperature Monitor

- Optional External Reference Input

- Power Good and FAULT Indicators

- 16mm × 16mm × 10.34mm BGA Package

APPLICATIONS

- Telecom, Data Centers and Networking Equipment

- Industrial and Test Equipment

LTM4664属于电源 - 板安装 > 直流转换器。亚德诺半导体技术有限公司制造生产的LTM4664直流转换器一种旨在将直流电压输入电平改变为一个或多个不同的直流电压输出电平的装置。