1 Features

Ÿ Synchronous switch buck converter

 Built-in power MOS

 Input operating voltage range: 8.2 V to 32 V

 Output voltage range: 3 V to 12 V, according to fast charging protocol

auto-adjust

 Output voltage with line compensation function 50 mV /A

 The PD output has CV/CC characteristics (the output current is less than

set value, output CV mode; the output current is greater than the set value

fixed value, output CC mode)

 VIN=12V VOUT=5V 3A board-side conversion efficiency

to 9 3.8

　Dual-port fast charging output

Supports dual USB Type C output

Supports USB Type C and USB A output

Supports dual USB A output

 Any output port supports fast charging

 Dual-port automatic plug-in detection function

　Support Type C output interface and USB PD protocol

Supports 5V, 9V, 12V voltage output

 Support PD2.0/PD3.0 PPS output protocol

 PPS supports 3.3V 11 V 20mV/step voltage output

out

　Fast charging specifications

Supports 2 Type C PD port outputs

Supports 2 BC1.2 and Apple protocols

Supports 2 Qualcomm QC2.0 and QC3.0

Supports 2 Huawei fast charging protocols FCP

Supports 2 Huawei fast charging protocols S CP

Supports 2 Huawei fast charging protocol high voltage S CP

Supports 2 Samsung fast charging protocols AFC

Supports 2 Spreadtrum fast charging protocols S F CP

　Multiple protections and high reliability

Input overvoltage, input undervoltage, output short circuit, output overvoltage

Flow protection and over-temperature protection

 DP/DM/CC overvoltage protection

 CC PIN withstand voltage 30V

 ESD 4KV DC withstand voltage 4 0 V

2 applications

　Car charger

　Fast charging adapter

　Smart power strip

3 Introduction

IP

6566 is a buck converter with integrated synchronous switch, supporting

Supports multiple output fast charging protocols, supports Type C output and USB

Dual-port output SOC IC of PD 2.0/PD3.0(PPS) protocol is for car

On-board charger, fast charging adapter, smart power strip provide complete solution

plan.

IP

6566 supports dual USB Type C USB Type C and

USB A, or dual USB A output, integrated dual-port automatic plug-in and pull-out

Detection function, any one port can support fast charging output when used alone.

When the dual ports are used at the same time, both ports output 5V, and the total power is 5V 3.4 A.

IP

6566 built-in power MOS input voltage range is 8.2 V

to 32 V, the output voltage range is 3V to 12 V. The maximum

20 W output power, can automatically charge according to the recognized fast charging protocol

Adjust output voltage and current. IP 6566 output 5V 3A board end to

The exchange efficiency is as high as 93.8.

IP

The PD output of 6566 has CV/CC characteristics. When the output

When the current is less than the set value, the output is in CV mode and the output voltage is constant;

When the output current is greater than the set value, the output CC mode, the output voltage

reduce .

IP

The output voltage of 6566 has a line compensation function, and the output current increases

After the increase, the output voltage will be increased accordingly to compensate for the impedance of the connecting line.

voltage drop.

IP

6566 has a soft start function to prevent startup shock.

The impact current affects the stability of the input power supply.

IP

6566 has a variety of protection functions, including input overvoltage and undervoltage.

Protection, output over-current, over-voltage, under-voltage, short-circuit protection and other functions.

IP

The 6566 is available in a 4 4 mm QFN 28 package.