ZSC31050FAG1 IDT原装正品 差动传感器
The ZSC31050 is a CMOS integrated circuit for amplification and sensor-specific correction of bridge sensor signals. The device provides digital compensation of sensor offset, sensitivity, temperature drift and non-linearity by a 16-bit RISC microcontroller running a correction algorithm. The ZSC31050 accommodates virtually any resistive bridge sensor (e.g., piezo-resistive and steel-membrane-based pressure sensors). In addition, the device can interface to a separate temperature sensor. The bi-directional digital interfaces (I2C, SPI, ZACwire™) can be used for a simple PC-controlled calibration procedure, encompassing writing and programming a set of calibration coefficients into an on-chip EEPROM. The ZSC31050 has been designed for industrial, medical and consumer applications and is specifically suited for most pressure sensors. It can also be used with force, torque, acceleration, angle, position and revolution sensors.
Features
Digital compensation of sensor offset, sensitivity, temperature drift and non-linearity
Accommodates nearly all bridge sensors via PGA and programmable ADC
Capable of conditioning bridge sensor signals ranging from 1 to 275mV/V
Sensor connections check and aging detection
Temperature compensation via internal diode, external diode or bridge sensor element
Output options: voltage (0 to 5V), current (4 to 20mA), PWM, I2C , SPI, ZACwire™ (one-wire interface), alarm
Adjustable ADC resolution (up to 15-bit) versus sampling rate (up to 3.9kHz)
Selectable bridge excitation: ratiometric voltage, constant voltage or constant current
Input channel for separate temperature sensor
Operation temperature range, depending on product version, up to -40°C to +150°C
AEC-Q100 qualification (temperature grade 0)
Supply voltage: +2.7V to +5.5V, with external JFET: 5 to 40 V
Available in SSOP16 or as die
原装正品,假一赔十!!!联系电话:0755-83466125/13530305958江小姐