General Description

The CS5530 is a highly integrated ΔΣ Analog-to-Digital Converter (ADC) which uses charge-balance techniques to achieve 24-bit performance. The ADC is optimized for measuring low-level unipolar or bipolar signals in weigh scale, process control, scientific, and medical applications.

Features & Descriptio

Chopper-stabilized Instrumentation Amplifier, 64X

• 12 nV/√Hz @ 0.1 Hz (No 1/f noise)

• 1200 pA Input Current

Digital Gain Scaling up to 40x Delta-sigma Analog-to-digital Converter

• Linearity Error: 0.0015 FS

• Noise Free Resolution: Up to 19 bits

Scalable VREF Input: Up to Analog Supply

Simple Three-wire Serial Interface

• SPI™ and Microwire™ Compatible

• Schmitt-trigger on Serial Clock (SCLK)

Onboard Offset and Gain Calibration Registers

Selectable Word Rates: 6.25 to 3,840 Sps

Selectable 50 or 60 Hz Rejection

Power Supply Configurations

• VA+ = +5 V; VA- = 0 V; VD+ = +3 V to +5 V

• VA+ = +2.5 V; VA- = -2.5 V; VD+ = +3 V to +5 V

• VA+ = +3 V; VA- = -3 V; VD+ = +3 V

CS5530-IS属于集成电路（IC） > 模数转换器（ADC）。凌云逻辑制造生产的CS5530-IS模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。