FEATURES GENERAL DESCRIPTION

 Compliant with DisplayPort Alternate Mode on USB

Type C standard

 Compliant with DisplayPort Specification version 1.4

and Embedded DisplayPort (eDP) Specification version

1.4

 Support up to 4 Main Link Lanes at 1.62Gbps,2.7Gbps

(HBR), 5.4Gbps (HBR2), or 8.1Gbps (HBR3) link rate

 Adaptive DisplayPort receiver equalization supported

for the compensation of input signal attenuation

 Support Fast and Full Link Training

 Support eDP Authentication: Alternative Scramble Seed

Reset and Alternative Framing

 HDMI transmitter compliant with HDMI specification

version 2.0 and DVI specification version 1.0

 HDMI transmitter supports up to 6.0Gbps data rate for

video timing of 4Kx2K@60Hz

 SCDC supported on HDMI DDC

 CEC tunneling over AUX is supported

 High-Dynamic-Range (HDR) Static Metadata: HDR10

(SMPTE ST2084), Hybrid Log-Gamma (HLG), Dolby

Vision (SMPTE ST2084) are supported

 RGB/YCC444/422 to YCC444/422/420 conversions are

supported, deep color depth up to 16 bit

 Progressive 3D video formats supported

 HDCP engine compliant with HDCP 2.3 and HDCP 1.4

specification with internal HDCP Keys

 HDCP 1.4/2.3 repeater supported

 USB Type-C port compliant with USB Type-C Cable

and Connector Specification revision 2.0

 Compliant with USB Power Delivery Specification

Revision 3.0, with USB Power Delivery BMC

transceiver integrated on USB Type-C port

 Integrated Ra, Rd and Rp for USB Type-C

 SPDIF/IIS input supported with audio sampling rate up

to 192KHz

 On-chip Audio Decoder which support 8 channel Audio

input from DP Rx and output from HDMI Tx, support

LPCM(16/20/24 bit) format with sampling rate up to

192kHz, compressed audio formats (AC3, DTS, DTSHD MA, and Dolby MAT) and HBR audio formats

with frame rate up to 1536kHz

 Embedded MCU to handle the control logic

 Full speed USB billboard module supported with USB

2.0 PHY integrated

 Embedded ROM, integrated EDID Buffer

 IIC Slave, USB 2.0 are available for firmware update

 IIC slave interface are available for debug

 Low power architecture, support Auto Power Saving

mode and low stand-by current

 RoHS compliant and Halogen free package

 Offered in 68 pin QFN package

Chrontel’s CH7216A is a low-cost, low-power

semiconductor device that translates the DisplayPort

signal to HDMI/DVI through the USB Type-C connector.

This innovative USB Type-C based DisplayPort receiver

with an integrated HDMI Transmitter is specially

designed to target the USB Type-C to HDMI converter,

adapter and dongle device. Through the CH7216A’s

advanced decoding / encoding algorithm, the input

DisplayPort high-speed serialized multimedia data can be

seamlessly converted to HDMI/DVI output.

The CH7216A’s DP/eDP receiver is compliant with the

DisplayPort Specification 1.4 and Embedded DisplayPort

(eDP) Specification version 1.4. With sophisticated

DisplayPort signal detection and the Lane Swap/AUX

polarity inversion logic, the CH7216A supports USB

Type-C cable plug orientation switch. With internal

HDCP key Integrated, the device support HDCP 2.3

specifications. In the device’s receiver block, which

supports four DisplayPort Main Link Lanes input with

data rate running at 1.62Gbps, 2.7Gbps, 5.4Gbps or

8.1Gpbs, and converted the input signal to HDMI output

up to 4Kx2k@60Hz. Leveraging the USB Power

Delivery control logic, the USB billboard module for

USB device indentify and DisplayPort’s unique

source/sink “Link Training” routine, the CH7216A is

capable of instantly bring up the video display to the

HDMI/DVI TV/Monitor when the initialization process is

completed.

The CH7216A also supports up to 8-channel audio input

from either DP Rx or SPDIF/IIS port and output from

HDMI Tx with sample rate up to 192 KHz. Available

audio bandwidth depends on the pixel clock frequency,

the video format timing, and whether or not content

protection re-synchronization is needed.

With sophisticated MCU and the embedded ROM,

CH7216A supports auto-boot and EDID buffer.

Leveraging the firmware auto-loaded from the embedded

ROM, CH7216A supports DP input detection, HDMI

connection detection, and determine to enter into Power

saving mode automatically.

APPLICATION

 USB Type C to HDMI 2.0 cable/Adapter

 On-board DP/eDP to HDMI 2.0 application