GENERAL DESCRIPTION

The ADP7102 is a CMOS, low dropout linear regulator that operates from 3.3 V to 20 V and provides up to 300 mA of output current. This high input voltage LDO is ideal for regulation of high performance analog and mixed signal circuits operating from 19 V to 1.22 V rails. Using an advanced proprietary architecture, it provides high power supply rejection, low noise, and achieves excellent line and load transient response with just a small 1 μF ceramic output capacitor.

FEATURES

Input voltage range: 3.3 V to 20 V

Maximum output current: 300 mA

Low noise: 15 μV rms for fixed output versions

PSRR performance of 60 dB at 10 kHz, VOUT = 3.3 V

Reverse current protection

Low dropout voltage: 200 mV at 300 mA load

Initial accuracy: ±0.8

Accuracy over line, load, and temperature: −2, +1

Low quiescent current (VIN = 5 V), IGND = 750 μA with 300 mA load

Low shutdown current: 40 μA at VIN = 12 V

Stable with small 1 μF ceramic output capacitor

7 fixed output voltage options: 1.5 V, 1.8 V, 2.5 V, 3 V, 3.3 V,

5 V, and 9 V

Adjustable output from 1.22 V to VIN − VDO

Foldback current limit and thermal overload protection

User programmable precision UVLO/enable

Power-good indicator

8-lead LFCSP and 8-lead SOIC packages

APPLICATIONS

Regulation to noise sensitive applications: ADC, DAC

circuits, precision amplifiers, high frequency oscillators,

clocks, and phase-locked loops

Communications and infrastructure

Medical and healthcare

Industrial and instrumentation

ADP7102ACPZ-3.0-R7属于集成电路（IC） > 线性 + 开关稳压器。亚德诺半导体技术有限公司制造生产的ADP7102ACPZ-3.0-R7稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。