GENERAL DESCRIPTION

The ADP3330 is a member of the Analog Devices, Inc., precision low dropout (LDO) anyCAP® voltage regulator family of products. The ADP3330 operates with an input voltage range of 2.9 V to 12 V and delivers a load current up to 200 mA. The ADP3330 stands out from the conventional LDOs with a novel architecture and an enhanced process that enables it to offer performance advantages and higher output current than its competition. Its patented design requires only a minimum output capacitor of 0.47 µF for stability. This device is insensitive to output capacitor equivalent series resistance (ESR), and is stable with any good quality capacitor, including ceramic (MLCC) types for space restricted applications.

FEATURES

High accuracy over line and load

±0.7 at +25°C

±1.4 over temperature

Ultralow dropout voltage: 140 mV (typical) at 200 mA

Requires only COUT= 0.47 μF for stability

anyCAP = stable with any type of capacitor, including

multilayer ceramic capacitors (MLCC)

Current and thermal limiting

Low noise

Low shutdown current: <2 µA

2.9 V to 12 V supply range

–40°C to +85°C ambient temperature range

Ultrasmall, thermally enhanced, chip-on-lead™ 6-lead SOT-23

package

APPLICATIONS

Cell phones

Notebook and palmtop computers

Battery-powered systems

PCMCIA regulators

Bar code scanners

Camcorders and cameras

ADP3330ART-3属于集成电路（IC） > 线性 + 开关稳压器。亚德诺半导体技术有限公司制造生产的ADP3330ART-3稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。