GENERAL DESCRIPTION

The ADN4666 is a quad-channel, CMOS low voltage differential signaling (LVDS) line receiver offering data rates of over 400 Mbps (200 MHz) and ultralow power consumption.

The device accepts low voltage (350 mV typical) differential input signals and converts them to a single-ended, 3 V TTL/CMOS logic level.

The ADN4666 also offers active high and active low enable/disable inputs (EN and EN) that control all four receivers. These inputs disable the receivers and switch the outputs to a high impedance state. Consequently, the outputs of one or more ADN4666 devices can be multiplexed together to reduce the quiescent power consumption to 10 mW typical.

FEATURES

±8 kV ESD IEC 61000-4-2 contact discharge on receiver input pins

400 Mbps (200 MHz) switching rates

100 ps channel-to-channel skew (typical)

100 ps differential skew (typical)

3.3 ns propagation delay (maximum)

3.3 V power supply

High impedance outputs on power-down

Low power design (10 mW quiescent typical)

Interoperable with existing 5 V LVDS drivers

Accepts small swing (350 mV typical) differential

input signal levels

Supports open, short, and terminated input fail-safe

Conforms to TIA/EIA-644 LVDS standard

Industrial operating temperature range of −40°C to +85°C

Available in surface-mount SOIC package and low profile

TSSOP package

APPLICATIONS

Point-to-point data transmission

Multidrop buses

Clock distribution networks

Backplane receivers

ADN4666属于集成电路（IC） > 驱动器，接收器，收发器。亚德诺半导体技术有限公司制造生产的ADN4666驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。