GENERAL DESCRIPTION

The ADM8830 is a charge pump regulator used for color thin film transistor (TFT) liquid crystal displays (LCDs). Using charge pump technology, the device can be used to generate three output voltages (+5.1 V ± 2, +15.3 V, –10.2 V) from a single 3 V input supply. These outputs are then used to provide supplies for the LCD controller (5.1 V) and the gate drives for the transistors in the panel (+15.3 V and –10.2 V). Only a few external capacitors are needed for the charge pumps. An efficient low dropout voltage regulator also ensures that the power efficiency is high and provides a low ripple 5.1 V output. This LDO can be shut down and an external LDO used to regulate the 5 V doubler output and drive the input to the charge pump section, which generates the +15.3 V and –10.2 V outputs if so required by the user.

FEATURES

3 Output Voltages (+5.1 V, +15.3 V, –10.2 V) from

One 3 V Input Supply

Power Efficiency Optimized for Use with TFT in

Mobile Phones

Low Quiescent Current

Low Shutdown Current (<1 μA)

Fast Transient Response

Shutdown Function

Power Saving during Blanking Period

Option to Use External LDO

APPLICATIONS

Handheld Instruments

TFT LCD Panels

Cellular Phones

ADM8830ARU-REEL属于集成电路（IC） > 特殊用途稳压器。亚德诺半导体技术有限公司制造生产的ADM8830ARU-REEL特殊用途稳压器该系列产品用于电源控制、某种形式的转换，适用于特定的复杂应用。因此，各种产品特性集差异较大，包括空燃比传感器接口、汽车交流发电机电压调节、DDR 端接、液体透镜控制、摩托车转向信号控制、热电 (peltier) 冷却器控制、压电触觉控制、阀门控制、小型发动机管理等。