The ADM1026 is a complete system hardware monitor for microprocessor-based systems, providing measurement and limit comparison of various system parameters. The ADM1026 has up to 19 analog measurement channels. Fifteen analog voltage inputs are provided, five of which are dedicated to monitoring +3.3 V, +5.0 V, and 12 V power supplies, and the processor core voltage. The ADM1026 can monitor two other power supply voltages by measuring its own VCC and the main system supply. One input (two pins) is dedicated to a remote temperature-sensing diode. Two additional pins can be configured as general-purpose analog inputs to measure 0 V to 2.5 V, or as a second temperature sensing input. The eight remaining inputs are general-purpose analog inputs with a range of 0 V to 2.5 V or 0 V to 3.0 V. The ADM1026 also has an on-chip temperature sensor.

Features

• Up to 19 Analog Measurement Channels (Including Internal Measurements)

• Up to 8 Fan Speed Measurement Channels

• Up to 17 General-Purpose Logic I/O Pins

• Remote Temperature Measurement with Remote Diode (Two Channels)

• On-Chip Temperature Sensor

• Analog and PWM Fan Speed Control Outputs

• 2-Wire Serial System Management Bus (SMBus)

• 8 kB On-Chip EEPROM

• Full SMBus 1.1 Support Includes Packet Error Checking (PEC)

• Chassis Intrusion Detection

• Interrupt Output (SMBAlert)

• Reset Input, Reset Outputs

• Thermal Interrupt (THERM) Output

• Limit Comparison of All Monitored Values

• This is a Pb-Free Device*

Applications

• Network Servers and Personal Computers

• Telecommunications Equipment

• Test Equipment and Measuring Instruments

ADM1026JST属于集成电路（IC） > 热管理。安森美半导体公司制造生产的ADM1026JST热管理热管理 IC 是根据温度控制电路电源的半导体器件。这些 IC 的功能包括风扇控制、硬件监控器、温度监控系统、热监控器、热电偶放大器、热电偶调节器和温度计–温控器。检测温度范围为 -260℃ 至 +1800℃，输出类型有 I2C、SMBus、低电平有效/高电平有效、模拟电压、开漏、PWM、SPI、2 线串行和并行–串行。