GENERAL DESCRIPTION

The ADL5500 is a mean-responding power detector for use in high frequency receiver and transmitter signal chains from 100 MHz to 6 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is internally ac-coupled and has a nominal input impedance of 50 Ω. The output is a linear-responding dc voltage with a conversion gain of 6.4 V/V rms at 900 MHz. The on-chip, 1 kΩ series resistance at the output combined with an external shunt capacitor creates a low-pass filter response that reduces the residual ripple in the dc output voltage.

FEATURES

True rms response

Excellent temperature stability

±0.1 dB accuracy vs. temperature over top 8 dB of input range

Up to 30 dB input dynamic range at 3.9 GHz

50 Ω input impedance

1250 mV rms, +15 dBm, maximum input

Single-supply operation: 2.7 V to 5.5 V

Low power: 3 mW at 3 V supply

RoHS compliant

APPLICATIONS

Measurement of CDMA2000, W-CDMA, and QPSK-/QAM-based OFDM, and other complex modulation waveforms

RF transmitter or receiver power measurement

ADL5500ACBZ-P7属于RF/IF，射频/中频和 RFID > 射频检测器。亚德诺半导体技术有限公司制造生产的ADL5500ACBZ-P7射频检测器射频检测器产品是用于测量射频信号的集成电路，包括适用于不同用途的许多型号，例如显示待测信号的峰值幅度，而非其平均值或 RMS 幅度。就这些产品探讨的常见主题包括能够测量高频信号输入、具有对数特征的传递函数。