GENERAL DESCRIPTION

The ADIS16362 iSensor® is a complete inertial system that includes a triaxis gyroscope and triaxis accelerometer. Each sensor in the ADIS16362 combines industry-leading iMEMS® technology with signal conditioning that optimizes dynamic performance. The factory calibration characterizes each sensor for sensitivity, bias, alignment, and linear acceleration (gyro bias). As a result, each sensor has its own dynamic compensation formulas that provide accurate sensor measurements over a temperature range of −20°C to +70°C.

FEATURES

Triaxis digital gyroscope with digital range scaling

±75°/sec, ±150°/sec, ±300°/sec settings

Tight orthogonal alignment: <0.05°

Triaxis digital accelerometer: ±1.7 g

Wide sensor bandwidth: 330 Hz

Autonomous operation and data collection

No external configuration commands required

Start-up time: 180 ms

Sleep mode recovery time: 4 ms

Factory-calibrated sensitivity, bias, and axial alignment

Calibration temperature range: −20°C to +70°C

SPI-compatible serial interface

Embedded temperature sensor

Programmable operation and control

Automatic and manual bias correction controls

Bartlett window FIR filter length, number of taps

Digital I/O: data ready, alarm indicator, general-purpose

Alarms for condition monitoring

Sleep mode for power management

DAC output voltage

Enable external sample clock input: up to 1.2 kHz

Single-command self-test

Single-supply operation: 4.75 V to 5.25 V

2000 g shock survivability

Operating temperature range: −40°C to +105°C

APPLICATIONS

Medical instrumentation

Robotics

Platform control

Navigation

ADIS16362属于传感器，变送器 > 运动传感器 - IMU（惯性测量装置、单元）。亚德诺半导体技术有限公司制造生产的ADIS16362运动传感器 - IMU（惯性测量装置、单元）运动传感器 - IMU（惯性测量装置）是一种利用加速计、陀螺仪和磁力仪测量速度、方向和磁力以获取方向、正确加速度和位置的器件。其他类型的传感器包括温度传感器、倾角仪和气压计。