GENERAL DESCRIPTION

The ADIN2299 is a complete, pretested solution that manages the

industrial protocol and network traffic for an applications processor.

The module contains everything needed to participate in a Ether-

CAT, PROFINET® real-time (RT) and isochronous real time (IRT),

EtherNet/IP network, including a communications controller, protocol

stack, flash, RAM, follower controller, and physical layer (PHY).

An applications processor connects via a universal asynchronous

receiver transmitter (UART), serial peripheral interface (SPI), or

Ethernet interface.

At the software layer, the applications processor connects to a

unified interface so the supported industrial protocols can be

used without changing the applications processor software. The

ADIN2299 platform was precertified so that the field device can

operate in any of the supported industrial Ethernet networks.

FEATURES

► Configurable industrial protocol support

► PROFINET RT (Class B)

► PROFINET IRT (Class C): coming soon

► EtherNet/IP with DLR

► EtherCAT

► All protocols precertified

► Configurable applications processor interface

► UART: 115,200 bps to 1,000,000 bps

► Ethernet at 10 Mbps or 100 Mbps

► SPI follower: 10 MHz maximum clock

► I2C, QSPI, and CAN: future option

► Industrial Ethernet interface-compliant to IEEE 802.3, 10Base or 100Base transmit half and full duplex

► Single 3.3 V power supply, 840 mW

► Cycle time down to 1 ms (cycle times vary based on protocol, link type, and application data)

► 194-ball chip-scale package BGA form factor

► RoHS 3 compliant

► –40°C to +85°C industrial temperature range

APPLICATIONS

► Factory and process automation

► Motion control

► Building automation

► Transportation

ADIN2299属于集成电路（IC） > 专用。亚德诺半导体技术有限公司制造生产的ADIN2299专用该系列产品可提供所需的功能，用以将信息源/信宿连到各种复杂或范围狭窄应用中的传感器、变送器、致动器、传输介质或其他此类端点。例如，汽车安全气囊驱动器、车身控制和信息娱乐总线、自适应电缆均衡器、智能卡等等。