General description

The ADC1005S060 is a 10-bit high-speed low-power Analog-to-Digital Converter (ADC) for professional video and other applications. It converts the analog input signal into 10-bit binary or gray coded digital words at a maximum sampling rate of 60 MHz. All digital inputs and outputs are Transistor-Transistor Logic (TTL) and CMOS compatible, although a low-level sine wave clock input signal is allowed.

The device requires an external source to drive its reference ladder.

Features

■ 10-bit resolution (binary or gray code)

■ Sampling rate up to 60 MHz

■ DC sampling allowed

■ One clock cycle conversion only

■ High signal-to-noise ratio over a large analog input frequency range (9.3 effective bits at 5 MHz full-scale input at fclk = 60 MHz)

■ No missing codes guaranteed

■ In-Range (IR) CMOS output

■ TTL and CMOS levels compatible digital inputs

■ 2.7 V to 3.6 V CMOS digital outputs

■ Low-level AC clock input signal allowed

■ External reference voltage regulator

■ Power dissipation only 312 mW (typical)

■ Low analog input capacitance, no buffer amplifier required

■ No sample-and-hold circuit required

Applications

■ Video data digitizing

■ Radar

■ Barcode scanners

■ Digital instrumentation

■ Transient signal analysis

■ Σ∆ modulators

■ Medical imaging

ADC1005S060属于集成电路（IC） > 模数转换器（ADC）。恩智浦半导体公司制造生产的ADC1005S060模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。