ADBMS6822中文资料PDF规格书
ADBMS6822规格书详情
GENERAL DESCRIPTION
The ADBMS68211 (single) and ADBMS68221 (dual) provide bidirectional
isolated serial port interface (isoSPI™) communications
between two isolated devices through a single twisted pair connection
for each data link. Each transceiver encodes logic states into
signals that are transmitted across an isolation barrier to another
transceiver. The receiving device decodes the transmission and
drives the slave bus to the appropriate logic states. The isolation
barrier can be bridged by capacitors or by a pulse transformer to
achieve hundreds of volts of isolation.
The ADBMS6821/ADBMS6822 transceivers drive differential signals
using matched source and sink currents, eliminating the requirement
for a transformer center tap and reducing electromagnetic
interference (EMI). Precision window comparators in the receiver
detect the differential signals.
The transceivers can be paired with advanced Analog Devices,
Inc., battery stack monitors to enable cell voltage and sensor monitoring
even while the system controller is powered down (low power
cell monitoring, or LPCM). The transceivers provide a timeout
function that wake up or alert the system when a pass heartbeat
message has not been received in the programmed time period.
Throughout this data sheet, all pin names refer to both transceivers
on the ADBMS6822. For example, VDD refers to both VDD and VDD2.
FEATURES
► Up to 2 Mbps isolated bidirectional serial data communications
► Drop in compatible: single (ADBMS6821) and dual
(ADBMS6822)
► Fully independent dual transceivers (ADBMS6822)
► Simple galvanic isolation using capacitors or transformers
► Bidirectional interface over a single twisted pair
► Supports cable lengths up to 100 meters
► Very low EMI susceptibility and emissions
► LPCM support for Analog Devices battery monitors
► Interrupt output for LPCM system wake-up
► 4 Mbps unidirectional mode
► Requires no software changes in most SPI systems
► Ultralow idle current
► Automatic interface wake-up detection
► Operating temperature range: –40°C to +125°C
► 3.0 V to 5.5 V isoSPI driver power supply
► 1.7 V to 5.5 V interface to microcontrollers
► 3.0 V to 30 V input for powering wake-up and monitoring functions
(12 V battery compatible)
► 32-lead, side solderable LFCSP
► AEC-Q100 qualified for automotive applications
APPLICATIONS
► Electric and hybrid electric vehicles
► Backup battery systems
► Industrial networking
► Remote sensors
供应商 | 型号 | 品牌 | 批号 | 封装 | 库存 | 备注 | 价格 |
---|---|---|---|---|---|---|---|
ADI(亚德诺) |
23+ |
N/A |
10000 |
正规渠道,只有原装! |
询价 | ||
ADI(亚德诺) |
2335 |
Original |
50000 |
只做原装优势现货库存,渠道可追溯 |
询价 | ||
ADI(亚德诺) |
23+ |
N/A |
115240 |
原厂直销,现货供应,账期支持! |
询价 | ||
ADI(亚德诺) |
23+ |
NA/ |
7350 |
原装进口,原厂直销!当天可交货,支持原型号开票! |
询价 | ||
ADI(亚德诺) |
22+ |
N/A |
10000 |
原装 BOM表可配单 |
询价 | ||
ADI/亚德诺 |
24+ |
QFP |
860000 |
明嘉莱只做原装正品现货 |
询价 | ||
2322+ |
NA |
33220 |
无敌价格 主销品牌 正规渠道订货 免费送样!!! |
询价 | |||
ADI |
21+ |
BGA |
600 |
只做现货 |
询价 | ||
ADI/LINEAR |
22+ |
NA |
4172 |
B原装正品现货N |
询价 | ||
ADI/亚德诺 |
22+ |
QFP |
6000 |
进口原装 假一罚十 现货 |
询价 |