GENERAL DESCRIPTION

The AD8155 is an asynchronous, protocol-agnostic, dual-lane 2:1 switch with a total of six differential CML inputs and six differential CML outputs. The signal path supports NRZ signaling with data rates up to 6.5 Gbps per lane. Each lane offers programmable receive equalization, programmable output preemphasis, programmable output levels, and loss-of-signal detection.

The nonblocking switch core of the AD8155 implements a 2:1 multiplexer and 1:2 demultiplexer per lane and supports independent lane switching through the two select pins, SEL[1:0]. Each port is a two-lane link. Every lane implements an asynchronous path supporting dc to 6.5 Gbps NRZ data, fully independent of other lanes. The AD8155 has low latency and very low lane-to-lane skew.

FEATURES

Dual 2:1 mux/1:2 demux

Optimized for dc to 6.5 Gbps NRZ data

Per-lane P/N pair inversion for routing ease

Programmable input equalization

Compensates up to 40 inches of FR4

Loss-of-signal detection

Programmable output preemphasis up to 12 dB

Programmable output levels with squelch and disable

Accepts ac-coupled or dc-coupled differential CML inputs

50 Ω on-chip termination

1:2 demux supports unicast or bicast operation

Port-level loopback

Port or single lane switching

1.8 V to 3.3 V flexible core supply

User-settable I/O supply from VCC to 1.2 V

Low power, typically 2.0 W in basic configuration

64-lead LFCSP

−40°C to +85°C operating temperature range

APPLICATIONS

Low cost redundancy switch

SONET OC48/SDH16 and lower data rates

RXAUI, 4× Fibre Channel, Infiniband, and GbE over

backplane

OIF CEI 6.25 Gbps over backplane

Serial data-level shift

2-/4-/6-lane equalizers or redrivers

AD8155ACPZ属于集成电路（IC） > 信号开关，多路复用器，解码器。亚德诺半导体技术有限公司制造生产的AD8155ACPZ信号开关，多路复用器，解码器逻辑型信号开关、多路复用器和编码器 IC 可用于对以数字格式表示数据的电信号进行路由和选择。这些器件与设计用于模拟信号的类似产品有所不同，它们保留的信息表示为两个电状态之一，而不是两个外部界限内的无穷变化量。