GENERAL DESCRIPTION

The AD79851 is a 16-bit, 2.5 MSPS successive approximation analog-to-digital converter (SAR ADC). It contains a low power, high speed, 16-bit sampling ADC, an internal conversion clock, an internal reference (and buffer), error correction circuits, and a versatile serial interface port. On the rising edge of CNV, the AD7985 samples an analog input, IN+, between 0 V and REF with respect to a ground sense, IN−. The AD7985 features a very high sampling rate turbo mode (TURBO is high) and a reduced power normal mode (TURBO is low) for low power applications where the power is scaled with the throughput.

FEATURES

16-bit resolution with no missing codes

Throughput: 2.5 MSPS (TURBO high), 2.0 MSPS (TURBO low)

Low power dissipation

15.5 mW at 2.5 MSPS, with external reference

28 mW at 2.5 MSPS, with internal reference

INL: ±0.7 LSB typical, ±1.5 LSB maximum

SNR

88.5 dB, with on-chip reference

90 dB, with external reference

4.096 V internal reference: typical drift of ±10 ppm/°C

Pseudo differential analog input voltage range

0 V to VREF with VREF up to 5.0 V

Allows use of any input range

No pipeline delay

Logic interface: 1.8 V/2.5 V/2.7 V

Proprietary serial interface SPI-/QSPI™-/MICROWIRE™-/DSP-compatible1

Ability to daisy-chain multiple ADCs with busy indicator

20-lead, 4 mm × 4 mm LFCSP

APPLICATIONS

Battery-powered equipment

Communications

ATE

Data acquisition systems

Medical instruments

AD7985BCPZ-RL7属于集成电路（IC） > 模数转换器（ADC）。亚德诺半导体技术有限公司制造生产的AD7985BCPZ-RL7模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。