GENERAL DESCRIPTION

The AD8475 is a fully differential, attenuating amplifier with integrated precision gain resistors. It provides precision attenuation (by 0.4 or 0.8), common-mode level shifting, and single-ended-to-differential conversion along with input overvoltage protection. Power dissipation on a single 5 V supply is only 16 mW.

The AD8475 is a simple to use, fully integrated precision gain block, designed to process signal levels of up to ±10 V on a single supply. It provides a complete interface to make industrial level signals directly compatible with the differential input ranges of low voltage high performance 16-bit or 18-bit single-supply successive approximation (SAR) analog-to-digital converters (ADCs).

The AD8475 comes with two standard pin-selectable gain options: 0.4 and 0.8. The gain of the part is set by driving the input pin corresponding to the appropriate gain.

The AD8475 also provides overvoltage protection from large industrial input voltages up to ±15 V while operating on a single 5 V supply. The VOCM pin adjusts the output voltage common mode for precision level shifting, to match the ADC’s input range and maximize dynamic range.

FEATURES

Precision attenuation: G = 0.4, G = 0.8

Fully differential or single-ended input/output

Differential output designed to drive precision ADCs

Drives switched capacitor and Σ-Δ ADCs

Rail-to-rail output

VOCM pin adjusts output common-mode voltage

Robust overvoltage protection up to ±15 V (VS = +5 V)

Single supply: 3 V to 10 V

Dual supplies: ±1.5 V to ±5 V

High performance

Suited for driving 18-bit converters up to 4 MSPS

10 nV/√Hz output noise

3 ppm/°C gain drift

500 μV maximum output offset

50 V/μs slew rate

Low power: 3.2 mA supply current

APPLICATIONS

ADC drivers

Differential instrumentation amplifier building blocks

Single-ended-to-differential converters

AD7690属于集成电路（IC） > 模数转换器（ADC）。亚德诺半导体技术有限公司制造生产的AD7690模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。