PRODUCT DESCRIPTION

The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-strapping options allow it to be used as a

linear amplifier-compensator or as a switched output setpoint controller using either fixed or remote setpoint control. It can be used to amplify its compensation voltage directly, thereby converting it to a stand-alone Celsius transducer with a low impedance voltage output.

FEATURES

* Pretrimmed for Type J (AD594) or Type K (AD595) Thermocouples

* Can Be Used with Type T Thermocouple Inputs

* Low Impedance Voltage Output: 10 mV/8C

* Built-In Ice Point Compensation

* Wide Power Supply Range: +5 V to 615 V

* Low Power: <1 mW typical

* Thermocouple Failure Alarm

* Laser Wafer Trimmed to 18C Calibration Accuracy

* Setpoint Mode Operation

* Self-Contained Celsius Thermometer Operation

* High Impedance Differential Input

* Side-Brazed DIP or Low Cost Cerdip

AD595CQ属于集成电路（IC） > 热管理。亚德诺半导体技术有限公司制造生产的AD595CQ热管理热管理 IC 是根据温度控制电路电源的半导体器件。这些 IC 的功能包括风扇控制、硬件监控器、温度监控系统、热监控器、热电偶放大器、热电偶调节器和温度计–温控器。检测温度范围为 -260℃ 至 +1800℃，输出类型有 I2C、SMBus、低电平有效/高电平有效、模拟电压、开漏、PWM、SPI、2 线串行和并行–串行。