GENERAL DESCRIPTION

The AD5110/AD5112/AD5114 provide a nonvolatile solution for 128-/64-/32-position adjustment applications, offering guaranteed low resistor tolerance errors of ±8 and up to ±6 mA current density in the A, B, and W pins. The low resistor tolerance, low nominal temperature coefficient and high bandwidth simplify open-loop applications, as well as tolerance matching applications.

FEATURES

Single-channel, 128-/64-/32-position resolution

5 kΩ, 10 kΩ, 80 kΩ nominal resistance

Maximum ±8 nominal resistor tolerance error

Low wiper resistance

±6 mA maximum wiper current density

Resistor tolerance stored in EEPROM (0.1 accuracy)

Rheostat mode temperature coefficient: 35 ppm/°C

Potentiometer mode temperature coefficient: 5 ppm/°C

2.3 V to 5.5 V single-supply operation

1.8 V to 5.5 V logic supply operation

Power-on EEPROM refresh time < 50 μs

I2C-compatible interface

Wiper setting and EEPROM readback

50-year typical data retention at 125°C

1 million write cycles

Wide operating temperature: −40°C to +125°C

Thin, 2 mm × 2 mm × 0.55 mm 8-lead LFCSP package

APPLICATIONS

Mechanical potentiometer replacement

Portable electronics level adjustment

Audio volume control

Low resolution DAC

LCD panel brightness and contrast control

Programmable voltage to current conversion

Programmable filters, delays, time constants

Feedback resistor programmable power supply

Sensor calibration

AD5110BCPZ80-1-RL7属于集成电路（IC） > 数字电位计。亚德诺半导体技术有限公司制造生产的AD5110BCPZ80-1-RL7数字电位计数字电位器是一系列集成电路器件，可提供类似于传统机械电位器或变阻器的可调节电阻，但通过电子信号而非机械输入来进行控制。虽然这些器件的电阻可耗散的电能相对有限，但其电子控制能力有助于小型化、自动化和远程控制信号级模拟电路，而这些电路本来可能会使用机械电位器。