1. General description

The 74LVT125; 74LVTH125 is a quad buffer/line driver with 3-state outputs controlled by the output

enable inputs (nOE). A HIGH on nOE causes the outputs to assume a high impedance OFF-state.

Bus hold data inputs eliminate the need for external pull-up resistors to define unused inputs. This

device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables

the output, preventing the potentially damaging backflow current through the device when it is

powered down.

2. Features and benefits

• Quad bus interface

• 3-state buffers

• Wide supply voltage range from 2.7 to 3.6 V

• BiCMOS high speed and output drive

• Output capability: +64 mA and -32 mA

• Direct interface with TTL levels

• Overvoltage tolerant inputs to 5.5 V

• Bus hold data inputs eliminate need for external pull-up resistors to hold unused inputs

• Live insertion and extraction permitted

• No bus current loading when output is tied to 5 V bus

• Power-up 3-state

• IOFF circuitry provides partial Power-down mode operation

• Latch-up performance exceeds 500 mA per JESD 78 Class II Level B

• Complies with JEDEC standard JESD8C (2.7 V to 3.6 V)

• ESD protection:

• HBM EIA/JESD22-A114-A exceeds 2000V

• MM EIA/JESD22-A115-A exceeds 200V

• Specified from -40 °C to 85 °C

74LVT125属于集成电路（IC） > 缓冲器，驱动器，接收器，收发器。安世半导体(中国)有限公司制造生产的74LVT125缓冲器，驱动器，接收器，收发器逻辑缓冲器、驱动器、接收器和收发器允许隔离对某个电路的逻辑信号的访问，以用于另一电路。缓冲器将其输入信号（不变或反相）传递到其输出，并可能用于清除弱信号或驱动负载。在布尔逻辑仿真器中，缓冲器主要用于增加传播延迟。逻辑接收器和收发器允许在数据总线之间进行隔离通信。