1. General description

The 74HC594-Q100; 74HCT594-Q100 is an 8-bit serial-in/serial or parallel-out shift register

with a storage register. Separate clock and reset inputs are provided on both shift and storage

registers. The device features a serial input (DS) and a serial output (Q7S) to enable cascading.

Data is shifted on the LOW-to-HIGH transitions of the SHCP input, and the data in the shift

register is transferred to the storage register on a LOW-to-HIGH transition of the STCP input.

If both clocks are connected together, the shift register will always be one clock pulse ahead of

the storage register. A LOW level on one of the two register reset pins (SHR and STR) will clear

the corresponding register. Inputs include clamp diodes. This enables the use of current limiting

resistors to interface inputs to voltages in excess of VCC.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100

(Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

• Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

• Synchronous serial input and output

• 8-bit parallel output

• Shift and storage registers have independent direct clear and clocks

• Independent clocks for shift and storage registers

• 100 MHz (typical)

• Wide supply voltage range from 2.0 V to 6.0 V

• CMOS low power dissipation

• High noise immunity

• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

• Input levels:

• For 74HC594-Q100: CMOS level

• For 74HCT594-Q100: TTL level

• Complies with JEDEC standards

• JESD8C (2.7 V to 3.6 V)

• JESD7A (2.0 V to 6.0 V)

• ESD protection:

• MIL-STD-883, method 3015 exceeds 2 kV

• HBM JESD22-A114F exceeds 2 kV

• MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)

• DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of

solder joints

3. Applications

• Serial-to parallel data conversion

• Remote control holding register

74HC594PW-Q100属于集成电路（IC） > 移位寄存器。安世半导体(中国)有限公司制造生产的74HC594PW-Q100移位寄存器移位寄存器是低级逻辑器件，通常用于在串行和并行方式之间转换数字逻辑信号形式的数据，或在数字字内移动数据位的位置。移位寄存器通常使用集成到一个设备中的一组触发器来实现，常用于集成度更高的逻辑器件，但仍可用于 I/O 扩展等应用，在这些应用中离散形式的函数可能会非常有用。