1. General description

The 74HC4060; 74HCT4060 is a 14-stage ripple-carry counter/divider and oscillator with three

oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13)

and an overriding asynchronous master reset (MR). The oscillator configuration allows design of

either RC or crystal oscillator circuits. The oscillator may be replaced by an external clock signal

at input RS. In this case, keep the oscillator pins (RTC and CTC) floating. The counter advances

on the HIGH-to-LOW transition of RS. A HIGH level on MR clears all counter stages and forces all

outputs LOW, independent of the other input conditions. Inputs include clamp diodes. This enables

the use of current limiting resistors to interface inputs to voltages in excess of VCC.

2. Features and benefits

• Wide supply voltage range from 2.0 to 6.0 V

• CMOS low power dissipation

• High noise immunity

• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

• All active components on chip

• RC or crystal oscillator configuration

• Input levels:

• For 74HC4060: CMOS level

• For 74HCT4060: TTL level

• Complies with JEDEC standards:

• JESD8C (2.7 V to 3.6 V)

• JESD7A (2.0 V to 6.0 V)

• ESD protection:

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V

• Multiple package options

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

3. Applications

• Control counters

• Timers

• Frequency dividers

• Time-delay circuits

74HC4060BQ属于集成电路（IC） > 计数器，除法器。安世半导体(中国)有限公司制造生产的74HC4060BQ计数器，除法器计数器和除法器 IC 是数字逻辑器件，可对输入发生的逻辑转换进行计数，然后使用多个并行输出重新发送累加的计数，和/或生成单个输出信号转换，从而对应用某些整数数量输入信号转换进行响应。除了简单的事件计数，它们还可用于各种频率合成应用。