1. General description

The 74HC390; 74HCT390 is a dual 4-bit decade ripple counter divided into four separately clocked

sections. The counters have two divide-by-2 sections and two divide-by-5 sections. These sections

share an asynchronous master reset input (nMR) and can be used in a BCD decade or bi-quinary

configuration. If master reset inputs (1MR and 2MR) are used to simultaneously clear all 8 bits of

the counter, a number of counting configurations are possible within one package. The separate

clocks (nCP0 and nCP1) of each section allow ripple counter or frequency division applications of

divide-by-2, 4, 5, 10, 20, 25, 50 or 100. Each section is triggered by the HIGH-to-LOW transition

of the clock inputs (nCP0 and nCP1). For BCD decade operation, the nQ0 output is connected

to the nCP1 input of the divide-by-5 section. For bi-quinary decade operation, the nQ3 output is

connected to the nCP0 input and nQ0 becomes the decade output. A HIGH on the nMR input

overrides the clocks and sets the four outputs LOW. This device features reduced input threshold

levels to allow interfacing to TTL logic levels. Inputs also include clamp diodes, this enables the use

of current limiting resistors to interface inputs to voltages in excess of VCC.

2. Features and benefits

• Input levels:

• For 74HC390: CMOS level

• For 74HCT390: TTL level

• Two BCD decade or bi-quinary counters

• One device can be configured to divide-by-2, 4, 5, 10, 20, 25, 50 or 100

• Two master reset inputs to clear each decade counter individually

• Supply voltage range from 4.5 V to 5.5 V

• High noise immunity

• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

• Complies with JEDEC standard JESD7A (4.5 V to 5.5 V)

• ESD protection:

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

74HC390D属于集成电路（IC） > 计数器，除法器。安世半导体(中国)有限公司制造生产的74HC390D计数器，除法器计数器和除法器 IC 是数字逻辑器件，可对输入发生的逻辑转换进行计数，然后使用多个并行输出重新发送累加的计数，和/或生成单个输出信号转换，从而对应用某些整数数量输入信号转换进行响应。除了简单的事件计数，它们还可用于各种频率合成应用。