DESCRIPTION

The 1N5913-5956B series of 1.5 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the part. These plastic encapsulated Zeners have moisture classification of Level 1 with no dry pack required. They are also available in various military screening levels by adding a prefix identifier as described in the Features below. The plastic molded Zeners with a P suffix provide a lower thermal resistance (junction to lead) compared to the optional glass body (G suffix) for these same JEDEC part numbers. Both package options are available by Microsemi. Microsemi also offers numerous other Zener products to meet higher or lower power and test-current applications.

FEATURES

• JEDEC registered 1N5913 to 1N5956B

• Zener voltage available 3.3V to 200V

• Standard voltage tolerances are plus/minus 5 with B suffix and 10 with A suffix identification

• Tight tolerances available in plus or minus 2 or 1 with C or D suffix respectively

• Options for screening in accordance with MIL-PRF- 19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers.

• Surface mount equivalents available as SMBJ5913 to SMBJ5956B or SMBG5913 to SMBG5956B

• Optional glass body axial-leaded Zeners available as 1N5913BG to 1N5956BG (see separate data sheet)

APPLICATIONS / BENEFITS

• Regulates voltage over a broad operating current and temperature range

• Wide selection from 3.3 to 200 V

• Flexible axial-lead mounting terminals

• Nonsensitive to ESD

• Moisture classification is Level 1 per IPC/JEDEC J-STD-020B with no dry pack required

• Specified capacitance (see Figure 3)

1N5928属于分立半导体产品 > 二极管 - 齐纳 - 单。美高森美公司制造生产的1N5928二极管 - 齐纳 - 单齐纳二极管可用于以反向击穿模式工作，并根据以这种方式使用时的行为来分类。这些器件可用作电压基准或限压用途，还可以用作类似于整流二极管的单向电流阀，但它们在这种模式下的性能通常不如专用器件理想。该系列产品的每个器件封装恰好实现该功能的一个实例。